Oxford Cutmaker 350 Plasma Cutter

Features

• Superior cut quality means straight clean cuts ready to weld without dressing & with minimal heat affected zone. 
• Cuts steel, stainless steel, Hardox, boron steel, aluminium & alloys, copper, brass, painted metals, rusty metals, mesh etc. 
• Infinitely variable power so you can always set output to the optimum for the material. 
• Thermal heating function allows the user to apply heat only, ideal for replacing gas bottles to remove rusted nuts, bearings etc. 
• Thermal gouging function for removing metal without cutting through, remove welds, brackets, fastenings etc. 
• Long life torch consumables & importantly, lower cost consumables compared with other leading makes. 
• Class leading air consumption, up to 50% less than our competitors, 100L/min (3.5CFM) so only a small compressor needed. 
• Air filter & regulator fitted to set the pressure & help trap moisture & pressure gauge displays setting. 
• 6M (20 foot) cutting/gouging/heating torch supplied as standard, takes low cost consumables. 
• Over 90% efficiency means the lowest power consumption possible so keeps your running costs to the minimum! 
• Low fume technology means up to 50% reduction in fumes compared with our competitors. 
• Non HF starting system means these are safe for use on vehicles & don’t interfere with IT systems etc. 
• Generator friendly design guarantees no damage even if the generator is unstable! 
• Not affected by harsh environments like inverter based machines so guaranteed no blow ups! 
• Built to comply with BS EN60974-1, BS EN60974-10, RoHS directive, weee directive & CE marked. 
• Really rugged industrial design for the longest possible life span. 

Technical Specifications

• Input voltage - 230V 1 Phase 16A
• Max severance cut capacity - 20MM
• Clean cut capacity - 15MM
• Pierce capacity - 9MM
• Max cutting power output - 5KW
• Minimum generator size for 3/4" power - 4KVA
• Recommended power output - 5.5KVA
• Air pressure & flow rate - 60-70PSI & 3CFM
• Duty cycle at half power or below - 100%
• Duty cycle at full power - 40%

All Oxford Plasma machines come with a 3M mains input lead, 3M work lead & a 6M hand torch suitable for cutting, thermal heating & thermal gouging. Wheels are fitted for best portability. 

In addition we include a torch consumable kit to keep you cutting for some time.